LES has a large inventory of Krones labeler parts, from new, used or rebuilt.
We also have spare parts kits for components like glue pots and label magazines. Keep these kits on your shelf to ensure you have the parts you need when you need them.
If you’re running low on metric hardware, ask us about a metric hardware assortment. The kits are assembled for specific models of labelers. With a metric hardware assortment, you will always have the fastener you need.
Most of the delay in a parts order is not shipping — it is the back and forth working out exactly which component is needed. Krones labelers have been built over several decades and the same nominal part can differ between machine generations, so a description alone is rarely enough to be certain.
With a photo and a model number we can usually confirm the part the same day. Without either, we can still work from a description of the machine and the failure, it just takes another round of questions.
For many components you have three routes. A new part is the simplest but the most expensive. A rebuilt part brings a component back to original tolerances and typically costs well under a new assembly. An exchange keeps your line running: you install a tested unit from our shelf and send the worn core back afterwards. Which one makes sense depends on how much downtime the changeover costs you, and we are happy to lay out the options rather than defaulting to the most expensive one.
The components that fail unexpectedly are rarely a surprise in hindsight — glue pots, pallets, centering bells, gripper cylinders and magazine parts wear on a predictable curve. If you tell us what you run and how hard you run it, we can help you put together a short critical-spares list so the next failure is a changeover rather than an outage.
Running a roll-fed machine? See Krones Contiroll parts, rebuilds and service — vacuum drums, cutting drums, glue rollers and splice components.
Trying to stop these faults before they start? See our labeler preventive maintenance guide — inspection cadence, wear items by machine type, what to keep on the spare parts shelf, and when a rebuild beats running to failure.
LES keeps a large inventory of new, used and rebuilt Krones labeler parts. For cold glue labelers (Solomatic, Topmatic, Starmatic, Universella, Bontmatic) that includes glue pallets, gripper cylinders, sponge rollers, label magazines and glue pumps. For container handling on Krones rotary labelers we carry centering bells, bottle plates, feedscrews and starwheels, and for hot melt machines (Contiroll, Canmatic) vacuum drums, glue pot parts and glue rollers.
The machine model and serial or build number, the Krones part number on the component, a photo of the part, and the aggregate type (cold glue, hot melt, Canmatic or pressure sensitive). With a photo and a model number we can usually confirm the part the same day.
A new part is the simplest but most expensive. A rebuilt part brings a component back to original tolerances for well under the cost of a new assembly. An exchange keeps your line running: you install a tested unit from our shelf and send the worn core back afterwards.
Yes. We assemble spare parts kits for specific labeler models, covering components like glue pots and label magazines, plus a metric hardware assortment so you always have the right fastener on the shelf.
We stock thousands of SKUs and offer custom engineering for obsolete components. Call 800-391-4867 or email sales@lesincorporated.com to check availability.
Fast parts, on-site service and straight answers from technicians who work on Krones labelers every day.
800-391-4867sales@lesincorporated.com
3115 Locust Rd, Gilmer, TX 75465
Tell us what you’re running and what you’re seeing on the line. We’ll tell you where we’d look first.
Contact LES