Our technicians can handle everything from part installation up to a complete teardown and rebuild. If a labeler just needs a tech to get it back up to speed, LES has the team to meet your expectations.
Calling out a technician should not feel like a gamble. Before anyone travels, we want enough information to arrive with the right parts in the van rather than diagnosing on your time and then ordering.
A short video is often worth more than a long phone call. Seeing the transfer happen at speed usually tells us in seconds what a description takes twenty minutes to narrow down.
Work ranges from a single part swap through to a full teardown and rebuild of an aggregate. Where it is practical we will show your maintenance team what we are doing and why, so the same fault does not need a call-out next time. If we find something beyond the original scope, you hear about it before we start on it — not on the invoice.
You get a plain description of what was wrong, what was replaced or rebuilt, and what we would keep an eye on next. If a component is close to end of life but not there yet, we will tell you so you can plan the changeover instead of reacting to it.
We cover cold glue, hot melt, Canmatic and pressure sensitive machines. If you are not sure whether a problem needs a visit or can be solved with a part and a phone call, ask — a good share of them turn out to be the latter.
Trying to stop these faults before they start? See our labeler preventive maintenance guide — inspection cadence, wear items by machine type, what to keep on the spare parts shelf, and when a rebuild beats running to failure.
One team for every Krones labeling platform you run.
A bottling line is rarely simple; it is often a complex ecosystem of different labeling technologies. Whether you are running the high-speed precision of a Solomatic (Cold Glue), the thermal dynamics of a Contiroll (Hot Melt), the delicate application of an Autocol (Pressure Sensitive), or the shrink-sleeve technology of a Sleevematic, you need a service partner who speaks the entire language.
We simplify the complexity of mixed-technology lines.
Our on-site service team provides holistic support for the full range of Krones labeling equipment. We eliminate the need for specialized contractors for every different machine type. By understanding the interplay between different labeling aggregates, bottle handling parts, and control systems, we deliver:
Your production floor has enough moving parts. Let us be the single, reliable solution for all your labeling maintenance and service needs.
Need parts as well as on-site service? Browse our Krones labeling machine replacement parts, organized by model, or see our Krones labeler parts exchange and remanufacturing.
We service cold glue labelers (Solomatic, Topmatic, Starmatic), hot melt labelers (Contiroll, Canmatic), pressure sensitive labelers (Autocol, APS aggregates, Vinetta), in-line labelers (Rotina, Polymatic, Rondella), Sleevematic shrink-sleeve machines and modular platforms such as Ergomodul.
The machine model, aggregate type and rough age; what the defect looks like on the finished container; when it started and whether anything changed on the line; line speed, container and label stock; and photos or a short video of the machine running, if you can get one safely.
Yes. Work ranges from a single part swap through a full teardown and rebuild of an aggregate, done on-site or through our Exchange Program.
No. A good share of problems turn out to be solvable with a part and a phone call. If you are not sure, call LES at 800-391-4867.
Fast parts, on-site service and straight answers from technicians who work on Krones labelers every day.
800-391-4867sales@lesincorporated.com
3115 Locust Rd, Gilmer, TX 75465
Tell us what you’re running and what you’re seeing on the line. We’ll tell you where we’d look first.
Contact LES